Izdelki za glavna kartica (1)

SNMP card DL802 (art. CNDL802) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification) Article:CNDL802 vendor code:DL802 A type:Built-in Overall dimensions (LxWxH):68 x 68.4 x 41 mm Weight:51 gr Slot dimensions for installation (LxW):79x42 mm External connectors:RJ45 UPS communication interface:RS232 Supply voltage:+5 ÷ + 15V Power consumption:3W Ethernet port:10M / 100M UTP, auto-sensing USB port:Not Dry contacts:Not RS485 port:Not Working temperature:0 ÷ +60 ⁰С Storage temperature:-40 ÷ +85 ⁰С Permissible humidity:10 ÷ 90% Sheath protection degree:IP20 (after installation in UPS) Supported network protocols:TCP / IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP, SMTP Email support:Yes SNMP version:v1, v2 MIB libraries:PPC MIB, RFC1628 Encryption support:IPv6, SNMPv3, Https, SSH, RADIUS Modbus protocol support:Modbus on TCP Built-in file manager:Not Real time clock:Yes, sync with NTP server and manual installation Built-in logs:Event log (100 records), data log (500 records) Temperature and humidity sensor:Not Sensor for temperature, humidity, leaks, door opening:Not External dry contact block:Not GPRS modem:Not WiFi modem:Not